We can replace a new lcd screen for iPhone 5c by ourselves

Screen as the face of a cell phone , it is one of the easiest damaged parts. We usually accidently crack or shatter it, then you need get a new lcd display to replace the cracked or shattered one. Don’t worry to send it to the repair store. You only get a new screen assembly, find a repair guid, you can also do the iPhone 5c screen replacement. Now let’s together have a try, and you will never worry about how to replace the cracked lcd screen for iPhone 5c.

First, prepare for repair tools and parts.

A new lcd screen with digitizer assembly for iPhone 5c

Pentaloble screwdriver

iSclack or plastic single suction cup opening tool

Plastic pry opening tool

#000 Phillips screwdriver

A point of Spudger

Adhesive

Step 1. Make sure you have powered off your iPhone 5c first.

Step 2. Remove the two pentaloble screws at the bottom of iPhone 5c(Red circle marked in the following picture.).

Step 3. Use the special double suction cups opening tool-iSclack to open the iPhone 6 safely.

The special double suction cups opening tool-iSclack opening procedure:

1)      Close the handle on the iSclack, opening the suction-cup jaws, and place the bottom of your iPhone in between the suction cups.

2)  Hold onto your iPhone securely and close the handle of the iSclack to separate the suction cups, pulling the front panel up from the rear case.

3) Take down the suction cup from the lcd screen, then you’ve opened the screen assembly from rear case.

Pre: if use the iSclack, you can safely open your iPhone enough to separate the pieces, but not enough to damage any of the display cables. And you can ignore the following steps until to the step 7. Surely, if you don't have a iSclack, you can also use the single plastic suction cup opening tool, like following steps.

Step 4. Press a suction cup onto the screen, just above the home button, then pressed securely onto the screen to get a tight seal.

Step 5. Pry the screen assembly gently, and use a plastic opening tool seperate the rear case from lcd screen with digitizer assembly in a proper distance.

Note: there are several clips attaching the front panel assembly to the rear case, so you may need to use a combination of the suction cup and plastic opening tool to free the front panel assembly. That’s why leave some room in a proper distance when separate the raer case from screen aseembly.

Step 6. Remove the plastic single suction cup opening tool from screen assembly.

Step 7. Pull the home button end of the front panel assembly and keep it supported at a 90º angle in relation to the rear case.

Note: before you remove the front screen panel, you should keep it supported at a 90º angle, because there are several cables connecting the rear housing.

Step 8. Remove the following screws securing the front panel assembly cable bracket, and take down the front panel assembly cable bracket from the logic board

   Two 1.3 mm screws(Red mark)

One 1.7 mm screw(Orange mark)

One 3.25 mm screw(Yellow mark)

Step 9. Disconnect these cable connectors from the rear housing with the plastic pry opening tool.

1）  The front-facing camera and sensor cable connector

Note: Be sure to only pry up on the connector, and not on the socket on the logic board.

2) The digitizer cable

Note: The LCD and Digitizer connectors are on the same cable assembly, so prying the digitizer connector up should disconnect both connectors. Double check that the two cables are fully disconnected before removing the display.

3）The front panel assembly

Step 10. Remove the two screws securing the home button bracket to the display assembly, and use a plastic opening tool to pry the edge of the home button ribbon cable up.

1.3 mm Phillips #000 screw(Red mark in the following picture)

Note: we’d better Start prying from the left and going right may rip your ribbon cable. The contacts are well adhered to the front panel and should be peeled up first.

Step 11. Remove the home button ribbon cable from the front panel with a tweezer.

Step 12. Use your finger tip to lift the home button up fron the right corner, then use the tip of spudger to peel the home button off gently.

The home button assembly has been taken down.

Step 13. Remove two screws（marked in the picture） securing the upper component bracket to the display assembly.

    One 4.2 mm Phillips #000 screw(Red mark)

    One 2.3 mm Phillips #000 screw(Orange mark)

Step 14. Use the flat edge of a spudger to push the earpiece speaker bracket off the display assembly.

Step 15. Take off the earphone speaker from front panel.

Step 16. Using the pointed end of a spudger to gently peel the earpiece speaker contact cable up, and separate this portion of the camera and sensor cable from the adhesive below.

Step 17. Slide the tip of a spudger under the microphone to lift the cable out of its recess in the display assembly.

Note: you can also skip the next step(step 18), if you only replace the display assembly. Take off the lcd shield plate with front camera ans sensor cable directly.

Step 18. Carefully and gently peel the cable assembly off of the LCD shield plate to remove it from the display.

Note: From 16-18 step, during these processes, never peel the cable connectors with a strong hand, or you may do the harm to these cables. Because there is mild adhesive fixing the cables and front panel. If meet difficulty to remove it, you can use a heat tool to heat the front panel where the cables is fixed.

Step 19. Remove these screws(two shown in the following picture).

1.2 mm Phillips #000 screw (Four screws in total from two side of the lcd frame)

Step 20. next, remove the following screws shown in the following picture.

One at bottom of the display assembly near the home button opening(Red mark)

One at the top of the display near the cables(Orange mark)

Step 21. Take off the lcd shield plate, finally you get the display assembly only.

Then you can use the new screen assembly to reinstall the all iPhone 5c parts you tear down following these steps in return. During the reinstalling processes, you may need adhesive to fix the parts, surely the double faced adhesive tape is also OK.

Please gently to deal with all the parts, then you get a new screen iPhone 5c.

There are more cell phone replacement parts and repair guide at hytparts store, welcome your visit, if you are interested in.

If you want to change a new lcd screen for iPhone 5c color same as the back housing, you can visit: Colorful Replacement LCD Screen Digitizer Assembly with HomeButton for iPhone 5C

I sincerely hope this can also help you.

iPhone 6 Plus VS Samsung Galaxy note 4

After iPhone 6 and iPhone 6 plus released, both of them are at the top of cell phone sale. And about iPhone 6 (Plus) price, review, issue, even cases, parts are also hot in the all topic lists. Compared to note 4, they are absolutely much more shining and attractive. It is said by Korea media, most Korean prefer iPhone 6 plus to the note 4. On the sale, Apple iPhone looks absolutely successful. Even so, there are many people ask which one is better, between iPhone 6 plus and Samsung galaxy note 4.
Maybe that is because iPhone 6 plus and Samsung galaxy note 4 are both released in beginning of September, and note 4 is earlier nearly for a week than iPhone 6 plus. So people are perfering to do the comparison. Now here we just from 6 cases offer the two phones data for comparison: design, display, camera,hardware, battery and availability.
Design

Display

Camera

Picture effection:

Note 4 camera picture 01

iPhone 6 plus camera picture 02

Note 4 camera picture 01

iPhone 6 plus camera picture 01

Samsung galaxy note 4 taken pictures are warmer, and the iPhone 6 plus are partial to the original image.
Hardware

Battery

Availability
Samsung galaxy note
Posted: 03 Sep 2014
Market Status: Released US carrier availability: Available - AT&T, Sprint, T-Mobile
iPhone 6 plus
Posted: 09 Sep 2014
Market Status: Released US carrier availability: Available - Verizon, AT&T, Sprint, T-Mobile, U.S. Cellular, Boost Mobile
In addition, Samsung galaxy note 4 have e-pen, and iPhone 6 plus don't have this kind of device, in fact, all of iPhones don't have. They are both excellent. If except their price, you can depend on your own need to choose the better one.
If you like using smart phone for working, and like the e-pen, the note 4 is a nice choice. And if you are always use the ios, and like to play some mini games, I think the iPhone 6 plus suit you better.

All these informations are from Hytparts store, if you want to share, Pls mark where it is from,thanks.

How to replace the iPhone 5s broken front glass only screen

If you get a cracked or shattered glass only screen accidently, don’t worry, it can be brought back by replacing a new glass lens, neither the entire lcd screen. But I have to say it is not easy repair, we costed nearly one hour to finished it. So we’d better do this replacement with professional guide to follow, to avoid damages from connecting parts. Here we show the glass only screen lens replacement for iPhone 5s. 5c 5.

If you meet this kind of case, you should start to teardown the iPhone 5s screen assembly first. So here we just start with the cracked glass screen assembly for iPhone 5s 5c 5.

The essential repair tools we should prepare for.
Heating tool(Heat gun, )
Stainless Steel and Silicone Flexible Scraper(003580)
A firm wire
UV glue adhesive

Step 1. Use the heat tool to heat the screen assembly properly, here we use the heat gun.

If you don’t have the heat gun, you can also use these two heat tool.
Note: the temperature should be between 90℃ and 150℃. You must take care about this point, I don’t gude you burn your house.
Step 2. Remove the LCD Touch Screen Middle Frame Supporting Bracket.

Note: Be careful to remove it, to avoid damages from the bracket.
Step 3. Heat the glass screen again properly, and use the Stainless steel and silicone flexible scraper to remove the cracked glass gently.

If the scraper can’t remove the glass, you can use the heat tool(heat gun) to heat screen assembly again and again, until to remove the glass clearly.

Step 4. Clean clearly the glue sticky gently with “ALCOHOL” glue cleaner.
Note: you use a piece of tissue or the tooth brush to recover the “ALCOHOL” glue cleaner.

Step 5. Use a repairing mold for iPhone 5s 5c 5 to fix the cleaned lcd digitizer assembly, which can make the new glass replaced easily.

Note: You can also do this without the repairing mold. Then if so, you should adjust the right place when you install the glass.
Step 6. Use the stick band to recover the flex cable to protect it from the UV glue.

Step 7. Apply the UV cure glue adhesive on the lcd digitizer assembly.

Step 8. Replace the new front glass on the screen (applied glue screen)

Then, we need to wait the glue adhesive to be dry and stead.
Step 9. During the drying term, you can clean the blizzard on the mid frame bracket.

If it is hard to remove, you can use the heat tool(heat gun) for help.

Step 10. Deal with well this parts removed from the bracket.

Step 11. Make sure the new glass replacement is fixed on the digitizer assembly, and take out the new glass lcd screen from the repairing mold.

Step 12. Clean the glue scattered on the digitizer back and around.

Step 13. Reinstall the mid frame bracket on the new glass lcd screen assembly.

Step 14. Finally, you get the new complete glass lcd display assembly.

Step 15. Reassembly the new glass lcd screen on your iPhone 5s 5c or 5.

To be honest with you, this guide suit for iPhone 5s, iPhone 5c and iPhone 5. During the processes, if you want to do it, please be careful your safety and gently to deal with the parts. Finally important notice, the replacement process produce some Blizzard rubbish, we should deal with properly, to avoid to be touched by kids surely

If you meet this kind of case, you should start to teardown the iPhone 5s screen assembly first, and the screen replacement processes we have shared at: http://www.hytparts.com/000645-oem-complete-lcd-with-digitizer-assembly-for-iphone-5s.html


If you want to see more guide and iPhone 5s replacement parts, welcome to hytparts store.